Forum Replies Created
-
AuthorPosts
-
corsec67
ParticipantHmmm I like what I saw with autostich so far… I need to try some more pics with it and see how it does… I did a sweep around the living room and it worked well
One problem you have to look out for is that close stuff will tend to have parallax errors, unless you have a panorama head tuned to your camera. This is actually easier on a smaller sensor since the parallax error will be smaller.
Other things to keep constant are the exposure, focus, focal length, whitebalance. It is also important to prevent lens flare. (You might know this, but sometimes I forget to set all of that on my camera and have problems stitching it later, especially the white balance which Hugin has problems compensating for. exposure can easily be compensated for)
Here is one stitch I did last summer, in IR as well.
corsec67
ParticipantHugin is a pretty good piece of software I use to do stitching. One problem with it is that if you do “autostiching” with it, it loves to grab points in clouds and nearby ground for matching between photos. But, that is easy to fix when matching stuff in photos, so that isn’t a big problem.
corsec67
ParticipantModerator had a busy time with this theme. That difficulty is strict and easy: no text with your picture.
corsec67
ParticipantI was thinking about entering this, but maybe the “funny” is way too subtle or just absent.
flickr page

There are some funny pictures here, good job everyone.
corsec67
ParticipantMore fuel on the fire:
The Library of Congress flickr profile has almost all of the pictures showing the film boundaries.corsec67
Participantvery cool i was just wondering if the spider changed the composition or something.i think its a blackwidow.
thanks for a quick answer 😀This is a Black Widow.
Doesn’t look like a Brown Widow either.
corsec67
Participant*) The first person to post a photo “torn paper” border that’s really subliminal bouncing boobies around the outside WILL be posted the week I have that career-apex life-best photo submission, that other one will win, and I will be mad.
that type of border would be off limits even under the looser rules we are discussing. i voted don’t care but after rethinking the subject maybe no borders is best. it sure is less distracting. same goes for the habit of centering some folks have/had. just because you can really isn’t a reason to do something.
What if I took the picture I wanted, then printed it out, ripped the edges, and scanned or took a picture of that, like this:
flickr page

As I see it, adding a thicker frame just uses up pixels that could be in the picture, so I say allow it, since there is reason enough to not use it. I have noticed that I try to take my pictures in a vertical orientation since that allows more pixels in the fark competition, but I still limit myself to 800px tall, not the full 1100px I could do.
corsec67
ParticipantFrequently well I upload to photobucket Fark deletes my images because the are too big in file size. First off, what is the Fark image file size limit, and how can I resize the file without resizing the image?
The limits on fark are :200K, 640×1100.
For editing pictures like that, The Gimp does really well.
http://www.gimp.org/corsec67
ParticipantI found a heap of dust recently on my sensor, here is what I did:
1) Grabbed my bulb air blower.
2) Put a fresh battery in my camera, took off the lens and set the mirror lockup function on.
3) Held the camera so the lens opening was facing the floor and sat there gently pumping air onto the sensor (and around it in case any dirt was sitting on the edge) for about 30 seconds.That seems to have done the job.
One big note:
Don’t use the mirror lock-up if you can avoid it. Using the special “sensor cleaning” mode is much better, because the sensor isn’t energized at all. Some dust can be stuck to the sensor with static electricity, and having the sensor energized means that they are going to be sticking a little bit harder.I had to wipe my sensor with a sensor wipe once, that isn’t too bad if you know what you are doing.
Most of the time, I just need to set the sensor cleaning mode and use my Giottos rocket blower a bit.
corsec67
Participantposting it here doesn’t disqualify it from entering?
not at all.
Just, if I were to post something cool, other people might be inspired to make something better as well.corsec67
ParticipantWow did the voting on my entries not go like I expected. I am definitely not complaining, but I would have expected the “Ladies day?” one to get more votes than it did. My “Fountain” entry is doing much better than I expected, which is always a good thing.
corsec67
ParticipantMy take on U-Man‘s question is whether the picture has to include the enitre utility pole, or can it be almost a macro shot, like here:
flickr page

(if this is ok I might use it)corsec67
ParticipantHere is the one I was considering:

Don’t drink this.flickr page

(Yes, that is gasoline, and yes we did toss that on a fire)corsec67
ParticipantU-Man‘s 2008-01-02 08:14:17 PM gets my vote for “smallest change in the image makes biggest difference”
Amazing how good the cropped version looks…
corsec67
Participantyes. photobucket is more for stuff like the photoshop competitions, and flickr is a place to have your whole photo album. A lot of farktographers are on flickr, so you can comment on their pictures directly and not clutter up the fark discussion with stuff about the one picture.
Flickr does take care of resizing and giving you thumbnails and such, so it is quite convenient. The main problem is that the 500px image that flickr gives you is smaller than the max size that fark allows, but sometimes is over 200k so that fark rejects it based on file size. I use my personal host for the image that goes in the competition itself and then link to the flickr page.
You could probably use photobucket for the image that goes in the competition and then link to the flickr page.
-
AuthorPosts